Bewel geared motors
Do not waste valuable energy! Lenze bevel geared motors reach a gearbox efficiency of 95%. This means an almost loss-free torque, regardless of the ratio. The high quality of the bevel gear toothing ensures minimum friction and thus a minimum of heat generation. Furthermore, wear-resistant bevel toothing ensures a long service life and energy saving. For calculators: Our bevel gearbox is available within a torque range from 45 to 450 Nm.
The right-angle gearboxes have two different types of gear toothing . These are bevel and (face) worm gear toothing. These differ from each other in efficiency, among other things. Especially for medium to high transmission ratios the higher efficiency of the bevel gear set is a convincing factor.
Set new benchmarks with our new motor with bevel gearbox
Technical data
| GKR 03 | GKR 04 | GKR 05 | GKR 06 | |
| Power rating: | 0.06 . . . 0.55 kW | 0.12 . . . 0.75 kW | 0.18 . . . 4 kW | 0.25 . . . 5.5 kW |
| Torque: | up to 45 Nm | up to 90 Nm | up to 240 Nm | up to 450 Nm |
| Transmission range: | 5 . . . 60, in steps of 1.13 | 5 . . . 60, in steps of 1.13 | 3.5 . . . 76, in steps of 1.13 | 3.4 . . . 68.0;, in steps of 1.13 |
| Gearing efficiency: | 95 % | 96 % | 96 % | 96 % |
| Feet: | integrated in the housing | integrated in the housing | integrated in the housing | integrated in the housing |
| Torque plate:
|
integrated in the housing or optionally at the pitch circle | integrated in the housing or optionally at the pitch circle | optionally at the pitch circle | optionally at the pitch circle |
PRODUCTS
